THR1100B-S6.V2 6-ZONE BASIC WALK-THRU METAL DETECTOR WITH TOP LED LIGHT
CE Mark, 6 MultiZone, Detects ECAC threat objects,10 security Level, IR Pass Sensor On‐Off
Selection, One way passenger counter.
ITEM NO. |
FEATURES |
THR1100B/s6 |
1 |
Technology |
Microprocessor Based Digitally Controlled Pulse Induction with Very Low Frequency and No Harmful Effects on Human Health |
2 |
Detection Zones |
6 |
3 |
LED Zone Indicator Lights On Side Panels |
No LEDs on Side Panels (Zone Display is on Control Unit) |
4 |
Separate Zone Sensitivity Setting Feature |
NO |
5 |
Throughput Rate (Detection Speed) |
30 Person/Minute |
6 |
Sensitivity level |
10 Levels / 246 Sub Sensitivity Settings |
7 |
Alarm Counter |
YES/5 digit |
8 |
Counter Incoming & Outgoing |
ONE WAY IN COUNTER (5 digit) |
9 |
Green/Red Bicolor Traffic Through LED Indication |
YES |
10 |
Tri-Color Metal Density Display Vu-Meter LED Bar Graph |
YES |
11 |
Auto Calibration |
YES |
12 |
Perform Self Test at Start Up and Continuously Check the System for Failures with Automatic Failure Display Function |
YES |
13 |
Environmental Magnetic Noise Level Display Feature |
YES |
14 |
Mechanical Lock for Menu Access |
NO 4 Digit PIN Code |
15 |
LCD |
4*20 Character |
16 |
IP Protection Level |
IP 20 (EN 60529) |
17 |
IR Pass Sensor ON/OFF Feature for continuously Active or Sensor Activated Detection Mode Selections |
Yes |
18 |
Automatic Sensitivity Selection for Target Metallic Objects (Smart Detector) |
No |
19 |
SCADA |
Yes (Simple Version / Enabling Remote Access to Settings only via a remote PC up to 100 m cable connection)
Software Optional |
20 |
Battery ON/OFF feature enabling Operation Without Mains / 2 hrs Continuous Operation Against Electricity Cut Offs |
No |
21 |
Battery Operation LED indicator on Control Unit |
No |
22 |
Automatically Shut Down the WTMD to prevent battery from deep discharge |
No |
23 |
Relay Output |
Yes |
24 |
Real-Time Video Prosecution Unit |
No |
25 |
IRDA (Pilot) Remote Control Unit |
No |
26 |
Audio/Visual Alarm Range |
2 meter |
27 |
Automatic Frequency Selection Feature for Interference Free Operation of Multiple WTMDs |
YES |
28 |
Interference free operation |
10cm distance constant metal / 150cm distance moving metallic object |
29 |
Ambient Temperature |
-20'C to 50'C |
30 |
Weight |
51Kg |
Conforms to European Norms and in Compliance with NILECJ-0601.00 L1-5 Standard and produced under ISO 9001: 2008 QMS (Chinese Metal Detectors comply their own National Norms Only) • We do not use China Made Production Input. (Chinese Equipment Sockets/Connectors and Electronic Circuitry is rather low quality and in most cases Exporter/Manufacturer and the Model Number Serial No is not even Clear and probably without a proper User’s Manual) •Certified Safe regarding Electromagnetic Field-EMC, IP Protection Levels, International Health and Safety Norms ( Certification could be Potato Stamp) • No Set Up Change is Necessary regarding Winter/Summer Seasnal Adjustments and Resistant to Vibration & Impact (Chinese Equipment my require Adjustments as per Temperature Changes) • Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination. • Give Alarm to all threat objects detected at different Alarm Zones. (Chinese equipment detects the Largest Threat Objects while others are not Pinpointed) • Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm. • No Interferences between Zones and No False Alarms (Chinese equipment does not operate like this once detect and then not) • Multi-Zone - 6 Real Detection Zones(Up/Middle/Down and Left/Right) • Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top • 10 sensitivity levels, 246 adjustable sensitivity steps at each • Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By • Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media (Certification with Chinese Equipment should be carefully checked) • Green/Red bicolor traffic through LEDs easily allows sight from distance 30 Persons/Minute • Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit • Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance • Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4x20 Characters LCD Screen • Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation. • Five Digit Incoming Counter (Visible/Invisible) • IR Pass Sensor ON/OFF Selection • Four-digit changeable digital Pin Code • Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment) • Reloading the factory default settings by one-touch button • Easy programming and monitoring with wide LCD display • 4 Menu Languages, Standard menu in English, German, Spanish and Turkish • Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms • OPTIONAL -Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains • No seasonal adjustment requirement thanks to its Digital Electronic System (DSP) • Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design • IP 20 Protection Level (EN 60529) • Manufactured for 7/24 Continuous Operation • 74 cm Net Passage Width and 200 cm Net Passage Height • Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects • Audio-Visual alarms are noticeable at a range of 2 meters • Micro-Processor Settings does not change when there is an electricity cut-off • Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use. • In conformity to CE and Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations. • Weight: 51 kg • Gross weight: 60 kg • Operating voltage:70VAC – 270VAC / 50Hz - 60Hz • Power: 10W Stand By- 20W (Alarm) • Package Dimensions (W x H x L): Box 1: 560 x225 x 2270 mm Box 2: 225 x 235 x 790 mm • Ambient Temperature: -20°C to +70°